▼

Building

Show All Answers

1. Accessory Dwelling Unit

County Zoning ordinance regulates the height, size, and location of accessory dwellings and dwelling units. Prior to applying for permit, contact Scott County Planning and Zoning to review parcel specific requirements. Planning and Zoning phone 952-496-8653 or [email protected]

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of structures. Review all applicable information and handouts prior to applying for permits. 

New Accessory Dwellings and 1 and 2 Family Dwelling permits are all-inclusive with plumbing, mechanical and sewer or septic permits (select septic or sewer in ePermit) 

Sub-contractors will be listed on the Contact and Contractor form and uploaded into the ePermit application.

Electrical permits shall be obtained by the installing contractor through MN Department of Labor and Industry Electrical Division.

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. Visit the ePermits Sign In Portal. 

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents (PDF) prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• New Home Checklist (PDF) - Initial each item indicating the document is being included in submittals and upload signed checklist
• Contact & Contractors Form (PDF) - To complete form, type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Site Plan – must include the following:  
  • Location and size of proposed building, other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
  • Grade and proposed building elevations
• Building Plans – Per MN Rules 1300, plans shall be dimensioned and drawn upon suitable material. Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations, and energy. Plans shall be uploaded as one multipage complete set (not individual sheets), individual sheet uploads will not be accepted. Plan sheets shall only be separated if larger than 50 MB.   The following details shall be identified on all Accessory Dwelling Unit plans 
  • All dimensions and elevations, rooms shall be labeled, unfinished areas shall be labeled as such
  • Footing and foundations sizes (width and height at all locations) with all reinforcing bar placement details on foundation sheet. If foundation information is provided on separate submittal, plans shall reference the document the foundation design details can be found on. Include the corresponding document sheet/page number at each foundation wall section as applicable. 
  • All header and beam sizes shall be shown on plans. If provided on separate submittal, plans shall reference the document the header and beam sizes are provided on. Include the corresponding document sheet/page number at each header or beam location.
  • Wall bracing design shall be in accordance with R602.10 or by licensed structural engineer - shall include property wind exposure category per R301.2.1.4, locations braced wall lines, size/location of panels, method of bracing and calculations.
  • When unique design methods are being used, it is best to include as much information as possible on the plans
  • Include all energy code details on plans
• Truss Specifications - Roof and Floor Layouts and specification sheets. Please upload as on complete pdf file.
• Energy Code Compliance Certificate (PDF) 
• Lighting Schedule (PDF) - May be a deferred submittal, but must be received and approved prior to scheduling final inspection
• Erosion and Sediment Control Agreement (PDF) - Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/
• Septic Design - consist of: Septic Application (PDF) , Site plan/drawing, design sheets, elevations, soil logs, perc tests, and signed management plan. For septic related questions, contact Scott County Environmental Services.
• Sewer and / or Water Main layout site plan and material specs – REQUIRED if not septic system - when connecting to community, municipal, or existing septic system not regulated by municipality.
• Driveway Permit - For driveways off a County road, refer to the Scott County Driveway Permit Link to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

Optional Submittals, if applicable

• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the 2015 Minnesota Building Code. An engineered design must be sealed by a structural engineer licensed in the State of Minnesota. If engineered design all part of building plans, upload in to Building Plans.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

2. Addition (Commercial)

Verify Zoning and C.U.P. requirements prior to applying for building permit, contact Scott County Planning and Zoning.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

• Township Approval Form  (PDF)- Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Contact & Contractor Form (PDF) -  Type or print neatly. Upload completed contact and contractor form as applicable for the project. Contacts and sub-contractors listed will be notified of permit.
• Special Inspection Form (PDF) - This form must be filled out in entirety and signed by project participants as applicable. Application acceptance will not occur without completed form. Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704  The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors.
• Survey/Detail Site Plans - A Certificate of Survey is required for new commercial construction. 
• Civil Plans - Required for commercial construction.
• Building Plans– MN Rule 1800.5200 requires construction plans and documents prepared and certified by a MN Licensed Architect and/or Engineer. Plans shall be uploaded as one multipage complete set (not individual sheets). Plan sheets shall only be separated if larger than 50 MB. Individual sheet uploads will not be accepted.
  • All of the following applicable plans shall be included in one submittal document:
    • Code Record
    • Architectural
    • Structural
    • Fire and Life Safety
    • Mechanical
    • Electrical
    • Plumbing
• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. The design must be sealed by a structural engineer licensed in the State of Minnesota.
• Building Energy Compliance – Provide compliance forms for Building Envelope, HVAC, Service Water Heating, and Electrical. All aspects of the building shall follow the same energy path. Either Minnesota Energy code or ASHRAE 90.1
• Specifications - Shall include product installation details not already addressed in the engineered design.
• Erosion and Sediment Control Plan and Agreement (PDF) - Previously approved grading agreement and plan or complete Erosion & Sediment Control General Notes for Building Permits form and signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.  
• Erosion and Sediment Control Plans - Previously approved grading plan. If none exists, then survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions contact SWCD 

3. Addition (Residential)

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of decks. Review all applicable information and handouts prior to applying for permits. 

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed.

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted. 

• Township Approval Form  (PDF) - Required for Blakeley, Jackson, and St. Lawrence townships only. Submit completed form with township approval signature. Do not upload if not required. 
• Site Plan – must include the following:  
  • Location and size of proposed addition
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
• Building Plans – Per MN Rules 1300, plans shall be dimensioned and drawn upon suitable material. Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations, and energy. Plans shall be uploaded as one multipage complete set (not individual sheets), individual sheet uploads will not be accepted. Plan sheets shall only be separated if larger than 50 MB.  The following details shall be identified on all Addition plans :
  • All dimensions and elevations, rooms shall be labeled, unfinished areas shall be labeled as such
  • Footing and foundations sizes (width and height at all locations) with all reinforcing bar placement details on foundation sheet. If foundation information is provided on separate submittal, plans shall reference the document the foundation design details can be found on. Include the corresponding document sheet/page number at each foundation wall section as applicable. 
  • All header and beam sizes shall be shown on plans. If provided on separate submittal, plans shall reference the document the header and beam sizes are provided on. Include the corresponding document sheet/page number at each header or beam location.
  • Wall bracing design shall be in accordance with R602.10 or by licensed structural engineer - shall include property wind exposure category per R301.2.1.4, locations braced wall lines, size/location of panels, method of bracing and calculations.
  • When unique design methods are being used, it is best to include as much information as possible on the plans
  • Include all energy code details on plans
  • Truss Specifications - Roof and Floor Layouts 
• Truss Specifications - Roof and Floor Layouts and specification sheets. Please upload as on complete pdf file.
• Energy Code Compliance Certificate  (PDF) - Type of print neatly. Must be completed in entirety, as applicable to the area of new construction
• Heat Loss, Combustion Air & make-up Air Calculations  (PDF) - Complete Heat loss calculations, combustion and ventilation air for upload
• Erosion and Sediment Control Agreement (PDF) - Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/

Optional if Applicable Submittals

• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. An engineered design must be sealed by a structural engineer licensed in the State of Minnesota.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation. 

Note:  Separate permits are required for plumbing, mechanical and sewer installations through Scott County ePermit portal.

The property owner occupying the dwelling may obtain the plumbing, sewer and mechanical permit if they are completing the installations. If the work is not being completed by the occupying property owner, plumbing and mechanical permits shall be applied for by the MN Licensed Plumbing contractor and MN Bonded Mechanical Contractor. Sewer by a MN Licensed Plumbing contractor or MN Certified Pipe Layer.

Electrical permit shall be obtained by installing contractor or installing property owner, through MN Department of Labor and Industry Electrical Division

4. Basement Finish

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of structures. Review all applicable information and handouts prior to applying for permits. See Basement Finish handout click here

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed.

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted. 

• Township Approval Form (PDF) -  Required for Jackson Township only. Submit completed form with township approval signature if applicable. Do not upload if not required. 
• Building Plans- Per MN Rules 1300, plans shall be dimensioned and drawn upon suitable material. Complete set of plans including structural, floor layout, cross sections, elevations, and energy. Plans shall be uploaded as one multipage complete set (not individual sheets), individual sheet uploads will not be accepted. The following details shall be included on all Basement Finish plans : 
  • All room dimensions shall be shown on plans. Include all walls, doors, windows, ceiling height
  • All rooms shall be labeled for the use. Areas that will remain unfinished shall be labeled accordingly
  • Structural details, if structural changes proposed
  • Show locations of plumbing fixtures on plans and identify if current rough in (drain, waste, vent) already exists
  • Show any additional mechanical equipment locations, such as: fireplace, mini-split, A/C, or other
  • If increasing the size of or adding openings to exterior or bearing walls, provide all loading and beam details in those areas including additional point load footings

Optional Submittals, if applicable

• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

Note:  Separate permits are required for plumbing, mechanical and sewer installations through Scott County ePermit portal.

The property owner occupying the dwelling may obtain the plumbing, sewer and mechanical permit if they are completing the installations. If the work is not being completed by the occupying property owner, plumbing and mechanical permits shall be applied for by the MN Licensed Plumbing contractor and MN Bonded Mechanical Contractor. Sewer by a MN Licensed Plumbing contractor or MN Certified Pipe Layer.

Electrical permit shall be obtained by installing contractor or installing property owner, through MN Department of Labor and Industry Electrical Division

5. Cell Tower

Verify requirements for new towers and co-locates prior to applying for building permit, contact Scott County Planning and Zoning.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

Antenna Replacement (Like for Like) - A building permit is not required for antenna replacements on existing towers when the size and weight of the equipment being removed is the same as the size and weight of the equipment being reinstalled.

Antenna (Additional or Size Change) - A building permit is required for addition of antenna or equipment on existing towers where no tower modifications. This includes antenna replacement that is not the same.

• Contact and Contractor Form (PDF) - To complete form, type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Building Plans - Structural Analysis and construction drawings, by design engineer.
• Specifications - Shall include product installation details not already addressed in the engineered design.

Tower/Structure - A building permit is required for modifications or repairs to existing tower structures and for new towers.

• Contact and Contractor Form (PDF) - To complete form, type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Building Plans - Structural Analysis and construction drawings, by design engineer.
• Special Inspection Form (PDF) - Due to the unique nature of the tower elevation, special inspections are required for tower alteration fastening and materials inspections. Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704  The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors. This form must be filled out in entirety and signed by project participants as applicable. Application acceptance will not occur without completed form. Special Inspections shall comply with the MN Building Code.
• Specifications - Shall include product installation details not already addressed in the engineered design.

6. Change of Use

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

Submittal Requirements:

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Building Plans with Code Record - Building layout plans for new use shall be provided. If construction activities must occur, application shall be for Commercial Remodel/Repair or Commercial Addition 

7. Deck

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of decks. Review all applicable information and handouts prior to applying for permits. See Deck handout click here 

Note: Deck permit type: Deck, deck with roof, and deck with roof and screens. Residential Addition:3 and 4 season porches with full walls, windows, insulation, heating or cooling.

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form  (PDF) - Required for Blakeley and Jackson townships only. Submit completed form with township approval signature. Do not upload if not required. 
• Site Plan – must include the following:  
  • The exact location and size of proposed deck
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
• Building Plans- Deck plans shall include layout view and cross-section. Plans shall be uploaded as one multipage complete set, individual sheet uploads will not be accepted. See Deck handout for specific required details to be included on the plans. The following details shall be identified on all deck plans:
  • All material details
  • Footing type, size, and location Important Note:  soil loading of max 1500 psf will be assumed without geotechnical support
  • Material type, sizes, spans, spacing, length of all joists, beams, ledgers, posts, decking, guardrails, stair stringers and treads
  • All dimensions shall be identified on plans:  length, width, height of deck, height of guardrail, identify any/all joist or beam cantilever

Optional Submittals

• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

8. Demolition

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

• Demolition Application (PDF) - Complete the Demo Application in its entirety and Upload
• Township Approval Form (PDF) - Use form to determine if township approval is required for project location.  Submit completed form with township approval signature if applicable. Do not upload if not required.
• Survey/Detail Site Plans - details shall include survey or other accurately scaled drawing showing:
  • Exact location and size of building/structure being demolished, other structures, and septic tanks/system
  • Distances to septic tanks/system and property lines

For septic system information, contact Scott County Environmental Services

9. Fence / Retaining Wall

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Building permits are required for the following fences:

• Fences over 7 feet in height may require engineered design.
• Fences required for safety, such as swimming pool,
  commercial spaces, or other safety fences.
• Retaining walls over 4 feet in height (requires engineered
  design).

Residential fences under 7 feet
in height a permit is not required.

Fence and Retaining Wall Submittal Requirements:

Township Approval Form  (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable   

• Survey/Civil/Site Plans -  details shall include survey or other accurately scaled drawing showing:
  • Location of proposed fence / retaining wall
  • Location of and distances from proposed fence / retaining wall to other structures, property lines, and septic tanks/system
• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. The design shall be sealed by a structural engineer licensed in the State of Minnesota.
• Special Inspections Form  (PDF) - May be required if identified by engineer’s design.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

Examples of specifications include:

Safety Fence Alarm Specifications

Material ES Report or other listing standard details

Fastener Specifications

10. Fire (Commercial)

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

Ansul Systems per MBC and MMC shall be by Scott County permit.

Fire Alarm Systems per MBC shall be by Scott County permit.

All other Fire Suppression systems shall be by Fire Code Official for township area of project or MN State Fire Marshal’s Division.

Submittal Requirements:

• Contact & Contractor Form (PDF) - Type or print neatly. Upload completed contact and contractor form as applicable for the project. Contacts and sub-contractors listed will be notified of permit.
• Building Plans - Complete set of plans including floor layout, cross sections, and elevations.
• Engineered Design - Fire suppression system shall be by engineered design in accordance with all applicable MBC, MSFC, and NFPA provisions.
• Specifications - Manufactures Specifications

11. Garage/Accessory Structure

County Zoning ordinance regulates the height, size, and location of accessory structures. Prior to applying for permit, contact Scott County Planning and Zoning to review parcel specific requirements. Planning and Zoning phone 952-496-8653 or [email protected]

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of structures. Review all applicable information and handouts prior to applying for permits. See Garage Accessory Structure handout click here

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF) - Required for Blakeley, Jackson, and St. Lawrence townships only. Submit completed form with township approval signature. Do not upload if not required.

• Accessory Structure Intended Use Statement Form (PDF) - Form must be completed and signed by building/property owner.    

• Site Plan – must include the following:  
  • Location and size of proposed building
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
• Building Plans– Complete set of plans shall be prepared by, and bear the stamp of, a MN Licensed Structural Engineer. Plans shall be uploaded as one multipage complete set, individual sheet uploads will not be accepted. The following details shall be identified on all Garage/Accessory Structure plans 
  • All dimensions and elevations, rooms shall be labeled, unfinished areas shall be labeled
  • Footing and foundations sizes (width and height at all locations) with all bar placement details on foundation page. If foundation information is provided on separate submittal, plans shall reference the document the foundation design details can be found on. Include the corresponding document sheet/page number at each foundation wall section as applicable 
  • All header and beam sizes shall be shown on plans. If provided on separate submittal, plans shall reference the document the header and beam sizes are provided on. Include the corresponding document sheet/page number at each header or beam location
  • Wall bracing design shall be in accordance with R602.10 or by licensed structural engineer - shall include property wind exposure category per R301.2.1.4, locations braced wall lines, size/location of panels, method of bracing and calculations.
  • When unique design methods are being used, it is best to include as much information as possible on the plans
  • Any proposed interior finishes shall be included on plans
• Truss Specifications - Roof and Floor Layouts and specification sheets. Please upload as on complete pdf file.
• Erosion and Sediment Control Agreement (PDF)Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/
• Driveway Permit - If applicable, for driveways off a County road, refer to the Scott County Driveway Permit link click here to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

Optional Submittals, if Applicable

• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. Design shall be sealed by a structural engineer licensed in the state of Minnesota.
• Accessory Structures intended to be conditioned with heating or cooling shall also meet MN Residential Energy Code, details shall be included in plans and/or specifications.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

12. Manufactured/Modular Home

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• New Home Checklist (PDF) - Initial each item indicating the document is being included in submittals and upload signed checklist
• Site Plan – must include the following:  
  • Location and size of proposed building
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
• Building Plans- Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations and energy.Per MN Rules 1300, plans shall be dimensioned and drawn upon suitable material. Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations, and energy. Plans shall be uploaded as one multipage complete set (not individual sheets), individual sheet uploads will not be accepted. The following details shall be identified on all Manufactured/Modular Home plans :
  • All Dimensions
  • Footing and foundations sizes with all bar placement details on foundation page. Include the type, location, and details of anchoring system.
  • Modular Homes include all header and beam sizes at all locations for site constructed structural walls.
  • Wall bracing design required for new site constructed exterior walls. Wall bracing design shall be in accordance with R602.10 shall be designed by a MN Licensed Structural Engineer or provide complete design including braced wall lines, size/location of panels, method of bracing and calculations. 
• Specifications - Manufacturer's specifications for installation of the home as well as product installation specifications if any materials, fasteners, or anchors require specific manufacturers’ specifications for installation
• Erosion and Sediment Control Agreement (PDF)- Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/
• Septic Design - consist of: Septic Application (PDF) , Site plan/drawing, design sheets, elevations, soil logs, perc tests, and signed management plan. For septic related questions, contact Scott County Environmental Services https://www.scottcountymn.gov/491/Environmental-Services
• Driveway Permit - For driveways off a County road, refer to the Scott County Driveway Permit link click here to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

Note:  Separate permits are required for plumbing, mechanical and sewer installations through Scott County ePermit portal.

The property owner occupying the dwelling may obtain the plumbing, sewer and mechanical permit if they are completing the installations. If the work is not being completed by the occupying property owner, plumbing and mechanical permits shall be applied for by the MN Licensed Plumbing contractor and MN Bonded Mechanical Contractor. Sewer by a MN Licensed Plumbing contractor or MN Certified Pipe Layer.

Electrical permit shall be obtained by installing contractor or installing property owner, through MN Department of Labor and Industry Electrical Division

13. Multi-Family

Verify Zoning requirements prior to applying for building permit, contact Scott County Planning and Zoning.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

• Township Approval Form(PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable.
• Contact & Contractor Form - Type or print neatly. Upload completed contact and contractor form as applicable for the project. Contacts and sub-contractors listed will be notified of permit.
  for your project
• Special Inspection Form - This form must be filled out in entirety and signed by project participants as applicable. Application acceptance will not occur without completed form. Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704 The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors.
• Survey/Detail Site Plans - A Certificate of Survey is required for new commercial construction. 
• Civil Plans - Required on all commercial construction
• Building Plans - MN Rule 1800.5200 requires construction plans and documents prepared and certified by a MN Licensed Architect and/or Engineer. Plans shall be uploaded as one multipage complete set (not individual sheets). Plan sheets shall only be separated if larger than 50 MB. Individual sheet uploads will not be accepted. All of the following applicable plans shall be included in one submittal document:
  • Code Record
  • Architectural
  • Structural
  • Fire and Life Safety
  • Mechanical
  • Electrical
  • Plumbing
• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. Design shall be sealed by a structural engineer licensed in the state of Minnesota.
• Building Energy Calculations and Compliance – Provide compliance forms for Building Envelope, HVAC, Service Water Heating, and Electrical. All aspects of the building shall follow the same energy path. Either Minnesota Energy code or ASHRAE 90.1
• Specifications - Manufacturers’ Specifications
• Erosion and Sediment Control Agreement - Previously approved grading and SWPPP agreement and plan or complete Erosion & Sediment Control General Notes for Building Permits form and signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.  
• Erosion and Sediment Control Plans - Previously approved grading and SWPPP plan. If none exists, then survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions contact SWCD.
• Septic Design - by separate permit, contact Scott County Environmental Services for requirements.
• Driveway Permit - Please refer to the Scott County Driveway Permit link to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

14. Non Residential New (Commercial)

For Conditional Use permit requirements, contact Scott County Planning and Zoning, prior to applying for building permit.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. 
• Contacts and Contractors Form (PDF) - Type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Special Inspection Form (PDF) - This form must be filled out in entirety and signed by project participants as applicable. Application acceptance will not occur without completed form. Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704  The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors.
• Survey/Detail Site Plans - A Certificate of Survey is required for new commercial construction. 
• Civil Plans - Required on all commercial construction
• Building Plans - MN Rule 1800.5200 requires construction plans and documents prepared and certified by a MN Licensed Architect and/or Engineer. Plans shall be uploaded as one multipage complete set (not individual sheets). Plan sheets shall only be separated if larger than 50 MB. Individual sheet uploads will not be accepted. All of the following applicable plans shall be included in one submittal document:
  • Code Record
  • Architectural
  • Structural
  • Fire and Life Safety
  • Mechanical
  • Electrical
  • Plumbing
• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. Design shall be sealed by a structural engineer licensed in the state of Minnesota.
• Building Energy Calculations and Compliance – Provide compliance forms for Building Envelope, HVAC, Service Water Heating, and Electrical. All aspects of the building shall follow the same energy path. Either Minnesota Energy code or ASHRAE 90.1
• Specifications - Manufacturer's Specifications
• Erosion and Sediment Control Agreement (PDF) - Previously approved grading and SWPPP agreement and plan or complete Erosion & Sediment Control General Notes for Building Permits form and signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.  
• Erosion and Sediment Control Plans - Previously approved grading and SWPPP plan. If none exists, then survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions contact SWCD 
• Septic Design - by separate permit, contact Scott County Environmental Services for requirements.
• Driveway Permit - For driveways off a County road, refer to the Scott County Driveway Permit link click here to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

15. Pole Building Residential Accessory

County Zoning ordinance regulates the height, size, and location of accessory structures. Prior to applying for permit, contact Scott County Planning and Zoning to review parcel specific requirements. Planning and Zoning phone 952-496-8653 or [email protected]

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of structures. Review all applicable information and handouts prior to applying for permits. See Pole Building handout click here

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF)- Required for Blakeley, Jackson, and St. Lawrence townships only. Submit completed form with township approval signature if applicable. Do not upload it not required.

• Accessory Structure Intended Use Statement Form (PDF) - Form must be completed and signed by building/property owner.  

• Site Plan – must include the following:  
  • Location and size of proposed building
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
• Building Plans- Complete set of plans shall be prepared by, and bear the stamp of, a MN Licensed Structural Engineer. Plans shall be uploaded as one multipage complete set, Individual sheet uploads will not be accepted. The following details shall be identified on all Pole Building plans :
  • Engineered structural design including footing size calculations. 
  • All dimensions
  • Floor layout
  • Cross sections
  • Elevations
  • Energy Code Compliance details consistent with design code shall be shown on plans when the building will be heated or cooled.
  • All proposed interior finishes shall be included with the design building plans
• Erosion and Sediment Control Agreement (PDF)Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/
• Driveway Permit - If a new driveway is proposed to be installed, driveways off a County road, refer to the Scott County Driveway Permit link click here to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

Optional Submittals, if Applicable

• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

Note:  Separate permits are required for plumbing, mechanical and sewer installations through Scott County ePermit portal.

The property owner occupying the dwelling may obtain the plumbing, sewer and mechanical permit if they are completing the installations. If the work is not being completed by the occupying property owner, plumbing and mechanical permits shall be applied for by the MN Licensed Plumbing contractor and MN Bonded Mechanical Contractor. Sewer by a MN Licensed Plumbing contractor or MN Certified Pipe Layer.

Electrical permit shall be obtained by installing contractor or installing property owner, through MN Department of Labor and Industry Electrical Division

16. Remodel/Repair (Commercial)

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Contact & Contractor Form (PDF) -  Type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Special Inspection Form (PDF) - Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704  The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors
• Survey/Detail Site Plans - A Certificate of Survey is required for commercial construction. 
• Civil Plans - Required on all commercial construction exterior construction.
• Building Plans-  MN Rule 1800.5200 requires construction plans and documents prepared and certified by a MN Licensed Architect and Engineer. Plans shall be uploaded as one multipage complete set (not individual sheets). Plan sheets shall only be separated if larger than 50 MB. Individual sheet uploads will not be accepted. 
  • All the following applicable plans shall be included in one submittal document:
    ◦Code Record
    ◦Architectural
    ◦Structural
    ◦Fire and Life
    Safety
    ◦Mechanical
    ◦Electrical
    ◦Plumbing
• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. Design shall be sealed by a structural engineer licensed in the state of Minnesota.
• Building Energy Calculations and Compliance – Provide compliance forms for Building Envelope, HVAC, Service Water Heating, and Electrical. All aspects of the building shall follow the same energy path. Either Minnesota Energy code or ASHRAE 90.1
• Specifications - Manufactures Specifications
• Erosion and Sediment Control Agreement (PDF) - Previously approved grading and SWPPP agreement and plan or complete Erosion & Sediment Control General Notes for Building Permits form and signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.  
• Erosion and Sediment Control Plans - Previously approved grading and SWPPP plan. If none exists, then survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions contact SWCD 

17. Remodel/Repair (Residential)

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of structures. Review all applicable information and handouts prior to applying for permits. 

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF) - Required for Jackson township only. Submit completed form with township approval signature if applicable. Do not upload if not required.   

• Building Plans - Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations and energy. Plans shall be uploaded as one complete multi-page file (not individual sheets)
  • The following details shall be identified on all Remodel/Repair plans:
    • All dimensions and elevations, all areas included in project shall be identified with before and after plans. 
    • Footing and foundations sizes (width and height at all locations) with all bar placement details on foundation page. If foundation information is provided on separate submittal, plans shall reference the document the foundation design details can be found on. Include the corresponding document sheet/page number at each foundation wall section as applicable. 
    • All header and beam sizes shall be shown on plans. If provided on separate submittal, plans shall reference the document the header and beam sizes are provided on. Include the corresponding document sheet/page number at each header or beam location.
    • Wall bracing in accordance with R602.10 shall be designed by a MN Licensed Structural Engineer or provide complete design including braced wall lines, size/location of panels, method of bracing and calculations. Required if altering existing braced wall sections.

Optional Submittals, if Applicable

• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Residential Building Code. An engineered design must be sealed by a structural engineer licensed in the State of Minnesota.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.
• Truss Specifications - Roof and Floor Layouts and specification sheets. Please upload as on complete pdf file if new truss installation will occur as part of this project.

Note:  Separate permits are required for plumbing and mechanical installations (minor alteration/repair) through Scott County ePermit portal.

The property owner occupying the dwelling may obtain the plumbing and mechanical permit if they are completing the plumbing and mechanical installations. If the work is not being completed by the occupying property owner, plumbing and mechanical permits shall be applied for by the MN Licensed Plumbing contractor and MN Bonded Mechanical Contractor.

Electrical permit shall be obtained by installing contractor or installing property owner, through MN Department of Labor and Industry Electrical Division

18. Reroof/Siding

Residential Replacement Roofing

No additional submittals required for permit application unless changing roof type. i.e. Replacing asphalt shingles with metal panels. If metal roofing is being installed upload mfg. installation specs for type of metal panels proposed.

Residential Replacement Siding - when applying for permit select all work items that apply

• Upload scope of work for stucco or masonry/stone veneer repair

Commercial Roof/Siding - Submittal documents are required for plan review.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable
• Contact & Contractors Form (PDF) - Upload completed contact and contractor form as applicable for project.
• Survey/Detail Site Plans - A detailed site plan identifying the location of the project. When multiple buildings on one site, identify location of building being reroofed.
• Building Plans - Provide details on type of roof and building materials, include roofing classification if applicable to the structure construction type and protection. Plans shall be uploaded as one multipage complete set (not individual sheets). Plan sheets shall only be separated if larger than 50 MB. Individual sheet uploads will not be accepted. 
• Specifications - Manufacturers’ Specifications

19. Residential 1 or 2 Family Home

New Residential 1 and 2 Family Dwelling permits are all-inclusive with plumbing, mechanical and sewer or septic permits (select septic or sewer in ePermit) 

Subs will be listed on the Contact and Contractor form and uploaded into the ePermit application.

Electrical permits shall be obtained by the installing contractor through MN Department of Labor and Industry Electrical Division.

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits web page How do I.... section   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF)-  Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.

• New Home Checklist (PDF) - Initial each item indicating the document is being included in submittals and upload signed checklist
• Contact & Contractors Form - (PDF) - To complete form, type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Certificate of Survey – must include the following:  
  • Location and size of proposed building, other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities
  • Grade and Building Elevations
• Building Plans – Per MN Rules 1300, plans shall be dimensioned and drawn upon suitable material. Complete set of plans including structural and braced wall design, floor layout, cross sections, elevations, and energy. Plans shall be uploaded as one multipage complete set (not individual sheets), individual sheet uploads will not be accepted. The following details shall be identified on all Residential 1 or 2 Family Home plans:
  • All dimensions and elevations, rooms shall be labeled, unfinished areas shall be labeled as such
  • Footing and foundations sizes (width and height at all locations) with all reinforcing bar placement details on foundation sheet. If foundation information is provided on separate submittal, plans shall reference the document the foundation design details can be found on. Include the corresponding document sheet/page number at each foundation wall section as applicable. 
  • All header and beam sizes shall be shown on plans. If provided on separate submittal, plans shall reference the document the header and beam sizes are provided on. Include the corresponding document sheet/page number at each header or beam location.
  • Wall bracing design shall be in accordance with R602.10 or by licensed structural engineer - shall include property wind exposure category per R301.2.1.4, locations braced wall lines, size/location of panels, method of bracing and calculations.
  • When unique design methods are being used, it is best to include as much information as possible on the plans
  • Include all energy code details on plans
• Truss Specifications - Roof and Floor Layouts and specification sheets. Please upload as on complete pdf file.
• Heat Loss, Combustion Air & make-up Air Calculations  (PDF) - Complete Heat loss calculations, combustion and ventilation air for upload
• Energy Code Compliance Certificate  (PDF) - Type or print neatly. Must be completed in entirety
• Lighting Schedule (PDF) - May be a deferred submittal, but must be received and approved prior to scheduling final inspection
• Erosion and Sediment Control Agreement (PDF)- Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans must include the following details: survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District at: https://www.scottswcd.org/
• Septic Design - consist of: Septic Application (PDF) , Site plan/drawing, design sheets, elevations, soil logs, perc tests, and signed management plan. For septic related questions, contact Scott County Environmental Services https://www.scottcountymn.gov/491/Environmental-Services
• Sewer and / or Water Main layout site plan and material specs – REQUIRED if not septic system - when connecting to community, municipal, or existing septic system not regulated by municipality.
• Driveway Permit - For driveways off a County road, refer to the Scott County Driveway Permit link click here to access information regarding requirements for County Driveway Permits. Scott County does not permit for the State or Township, only the County. Please refer to the State and Townships regarding state or township roads.

Optional Submittals, if Applicable

• Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. Design shall be sealed by a structural engineer licensed in the state of Minnesota.
• Specifications - Provide product installation specifications if any materials or fasteners require specific manufacturers’ specifications for installation.

20. Solar (Commercial)

Verify Zoning rules prior to applying for permit, contact Scott County Planning and Zoning.

Required Submittals ----- Important: Project address shall be displayed on all submittal documents. Applications with incomplete submittals will be rejected and delayed.

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing.

• Township Approval Form (PDF)– Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Contacts and Contractors Form(PDF) - Type or print neatly. Upload completed contact and contractor form as applicable for your project. Contacts and sub-contractors listed will be notified of permit.
• Survey/Detailed or Site Plan – A Certificate of Survey is required for new dwelling construction:
  • Proposed location of the Solar Panels & Transformers
    • Ground Mounted Panels – Distance and Location of panels on the property in relation to other structures, septic tanks/system, and property lines.
    • Roof Mounted Panels – What structure they are mounted on, as well as access and pathways according to Section 3111 2020 MBC
• Building Plans– Plans shall be uploaded as one multipage complete set (not individual sheets).  Plan sheets shall only be separated if larger than 50 MB.  Individual sheet uploads will not be accepted.
  • Ground Mount Panel - Plans shall include all mounting/racking and footing details.
  • Roof Mount Panel - Plans shall include existing roof structure analysis by a qualified structural engineer or all framing details including spacing and design loads of engineered roof trusses if applicable, or species and grade of rafters, rafter sizes and framing methods used, spacing and spans of rafters.
  • Engineered Design - Engineered design shall be submitted if construction cannot be verified by the minimum prescriptive requirements of the Minnesota Building Code. The design must be sealed by a structural engineer licensed in the State of Minnesota.
• Special Inspection Form (PDF) - Special Inspections shall comply with the MN Building Code. Please see Chapter 17 Section 1704  The special inspector can be an approved qualified third party agency or the registered design professional in responsible charge and engineers of record involved in the design of the project are permitted to act as the approved agency and their personnel are permitted to act as the special inspector for the work designed by them, provided they qualify as special inspectors.
• Specifications – Provide panel and mounting/racking manufacturers specifications

Additional Resources: https://www.dli.mn.gov/business/electrical-contractors/solar-photovoltaic-pv-resources

21. Solar (Residential)

MN State Building Codes regulates the design, construction, alteration, repairs and demolition of decks. Review all applicable information and handouts prior to applying for permits. 

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Required Submittals - Documents required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 

All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted.

• Township Approval Form (PDF) – Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Survey/Detailed site plan – details shall include survey or other accurately scaled drawing showing:
  • Proposed location of the Solar Panels & Transformers
    • Ground Mounted Panels – Distance and Location of panels on the property in relation to other structures, septic tanks/system, well and property lines.
    • Roof Mounted Panels – What structure they are mounted on, as well as access and pathways according to Section R324.6 2020 MRC
• Building Plans– Plans shall be uploaded as one multipage complete set (not individual sheets).  Plan sheets shall only be separated if larger than 50 MB.  Individual sheet uploads will not be accepted.
  • Ground Mount Panel - Plans shall include all mounting/racking and footing details.
  • Roof Mount Panel - Plans shall include existing roof structure analysis by a qualified structural engineer or all framing details including spacing and design loads of engineered roof trusses if applicable, or species and grade of rafters, rafter sizes and framing methods used, spacing and spans of rafters.
• Specifications – Provide panel and mounting/racking manufacturers specifications

Specific MN requirements for roof or ground mounted residential solar panels: https://www.dli.mn.gov/sites/default/files/pdf/fs_res_solar.pdf

 Additional Resources: https://www.dli.mn.gov/business/electrical-contractors/solar-photovoltaic-pv-resources

22. Swimming Pool

Instructions

• To review all instructions for ePermit registration, PDF file naming requirements, and applying through the ePermit portal prior to applying for permit, visit our ePermits Sign In page.
• Review Naming Submittal Documents (PDF) prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 
• Required Submittals - Documents are required to be uploaded into ePermit portal at the time of application. Applications with incomplete submittals will be rejected and delayed. Project address shall be displayed on all submittal documents, forms and drawings. Applications with incomplete submittals will be delayed. 
• All documents must be flattened, scanned or printed and unlocked in pdf format. Open fillable forms or documents with open control points cannot be accepted. 

Required Information & Documents

• Township Approval Form (PDF) - Use form to determine if township approval is required for project location. Submit completed form with township approval signature if applicable. Do not upload if not required.
• Site Plan– Must include the following:  
  • Location and size of proposed swimming pool
  • Location of other structures, property lines, septic tanks, septic drain field, well and any wetlands
  • Location of any gas, plumbing, or electrical piping in the vicinity of construction
  • Distances from the proposed building to all other structures, property lines, and utilities 
• Building Plans- Plans shall be uploaded as one multipage complete set, individual sheet uploads will not be accepted. Complete set of plans including:
  • Installation and footing requirements
  • If not using a safety cover please provide all barrier fence details. See Pool Handout (PDF) for specific required details to be included on the plans.
• Specifications- Details shall include:
  • Pool Safety cover in compliance with standard ASTM F1346-91
  • Pool heater - if multiple heaters shown in spec, the heater being installed shall be circled or otherwise identified.
• Erosion and Sediment Control Agreement (PDF) - Complete Erosion & Sediment Control General Notes for Building Permits form, Signed Building Permit Erosion & Sediment Control (ESC) Escrow Agreement form.
• Erosion and Sediment Control Plans- Must include the following details: 
  • Survey or other accurately- scaled drawing showing the location of the proposed structure, direction of water flow, location of perimeter control, how the site will be permanently stabilized and other requirements that are on the Erosion Control Agreement. 
  • For new structures, also include: low floor elevations, limits of grading / construction area, and location of rock entrance. Questions regarding erosion and sediment control designs and requirements shall be directed to Scott Soil and Water Conservation District. 

23. Windows/Doors (In Existing Opening)

MN State Building Codes regulates the design, construction, alteration, repairs and demolition. Review all applicable information and handouts prior to applying for permits. 

Review instructions for ePermit registration, pdf file naming requirements, and applying through the ePermit portal prior to applying for permit. See ePermits, How do I.... click here   

IMPORTANT: Electronic submittal document files are required to be named appropriately to ensure efficient permit processing. Review Naming Submittal Documents prior to starting ePermit process to ensure all files are labeled appropriately. See all related ePermit submittal and resubmittal requirements to help avoid delays in processing. 

Permit Types

Residential Window/Door Replacement - in existing framed rough opening or window inserts being installed into existing window. Provide description and U-Factor details when applying for permit on line.

Residential New Openings for Window/Door - shall be applied for as a Residential Remodel/Repair permit. See document requirements  Click Here.

Commercial Window/Door Replacement - provide the following submittal documents for plan review.

• Contacts and Contractors Form - (PDF) - To complete form, type or print neatly. Upload completed contact and contractor form as applicable for the project. Contacts and sub-contractors listed will be notified of permit.
•  Site Plans -  details shall include location of all replacement windows and doors
• Building Plans - Provide details on type of wall assembly, construction type, hardware, and materials; including floor plan identifying all windows and/or doors that are being replaced
• Specifications - Manufacturers’ Specifications

Commercial New Opening for Window/Door - shall be applied for as a Commercial Remodel/Repair permit. See submittal requirements Click Here.